I. Product Description CRC Mass Air Flow Sensor Cleaner is a safe and effective way to clean delicate MAF sensors in modern vehicles. Engines rely heavily on accurate readings from the MAF sensor to run smoothly and efficiently. A contaminated sensor is likely to cause poor fuel economy, excessive emission, power loss, hard starting, stalling and even gear problems. Located between the air filter and the throttle body, the MAF sensor can easily be cleaned with just a few sprays of CRC Mass Air Flow Sensor Cleaner – it only takes a few minutes. For maximum performance use CRC Mass Air Flow Sensor Cleaner every time air filter is serviced. II. Features & Benefits • Cleans & Protects MAF Sensors – Will not damage MAF sensors or housing (unlike other chemicals) • Plastic Safe & Residue Free – Evaporates in seconds • Improves Air/Fuel Ratio • Increases km/litre – Improves fuel economy • Increases/Restores Horsepower – Gains 4-10 horsepower • Reduces Rough Idle • Decreases Hesitation & Pinging III. Directions for Use Preparation: 1. Turn off vehicle. Do not apply while equipment is energized. 2. Locate your MAF sensor between the air filter and throttle body. 3. Unplug MAF sensor wire harness. 4. Remove MAF housing. 5. Place cloth under MAF sensor to catch any run-off. Clean the MAF Sensor: 1. With extension tube attached, apply 10-15 sprays of CRC MAF Sensor Cleaner on to hot wires or flat film element. Be sure to spray all sides of the MAF sensor and clean all wires and connectors.
×
×